Comfort Glow CCL3018PA/NA Owner's Operation And Installation Manual page 17

INSTALLATION
Continued
5.
For CCL3924PTA/NTA and CCL3930PTB/NTB
Locate pin and hole on the bottom of
Only:
crossover log (#5). Slide the pin into the hole
located in crossover log (#4). Slide the hole
onto the pin on front log (#1). See Figure 23.
For CCL3018PA/NA and CCL3018PTA/NTA
Locate holes on the bottom of crossover log
Only:
(#5). Slide the holes over the left pins on middle
log (#2) and front log (#1). See Figure 24.
6. Locate holes on the bottom of crossover log
(#6). Slide these holes onto the right pins
located in middle log (#2) and front log
(#1). See Figure 25 for CCL3924PTA/NTA
or CCL3930PTB/NTB. See Figure 24 for
CCL3018PA/NA or CCL3018PTA/NTA.
7. For CCL3930PTB/NTB only: Locate holes
on the bottom of crossover log (#7). Slide
onto the pins located in crossover log (#6)
and middle log (#2). See Figure 26.
8. Add lava rock around base of heater if de-
sired. Do not place any lava rock on logs or
burner.
Pins
Middle
Log (#)
Figure 22 - Installing Crossover Log #4
(CCL3930PTB/NTB Shown)
Front Log (#1)
Figure 23 - Installing Crossover Log #5
(CCL3930PTB/NTB Shown)
113097-01E
Crossover
Log (#4)
Back Log
(#3)
Crossover
Log (#5)
Crossover
Log (#4)
www.desatech.com
Crossover
Crossover
Log (#4)
Log (#5)
Middle
Log (#)
Front
Log (#1)
Figure 24 - Installing Crossover Log
#5 and Log #6 (CCL3018PA/NA and
CCL3018PTA/NTA Only)
Front
Log (#1)
Figure 25 - Installing Crossover Log #6
(CCL3930PTB/NTB Shown)
Holes
Pins
Figure 26 - Installing Crossover Log #7
(Model CCL3930PTB/NTB Only)
Crossover
Log (#)
Crossover
Log (#)
Pins
Middle
Log (#)
Crossover
Log (#7)
Middle
Log (#)
Crossover
Log (#)
17