Using the menus (Continued)
The control setting menu
This menu sets items regarding wired LAN.
By this setting, you can transmit operation status messages from the projector to the
specified E-mail address.
Item
Wired LAN
[
: Wired LAN setting]
Projector name: Enter a character string (0 to 64 characters)
using numeric keys of the remote control.
DHCP: Use
IP address: Enter a character string using numeric keys of the
remote control.
Subnet mask: Enter a character string using numeric keys of the
remote control.
Gateway: Enter a character string using numeric keys of the
remote control.
Confirm: [OK
[
: E-mail setting]
Email
Status notification: On
SMTP server: Enter a character string using numeric keys of the
remote control.
Port number: Enter a character string using numeric keys of the
remote control.
Destination address: Enter a character string using numeric
keys of the remote control.
Confirm: [OK
[
: PJLink setting]
PJLink
PJLink authentication: On
Password: Enter a desired character string (1 to 32 characters)
using numeric keys of the remote control.
Confirm: [OK
Detailed description
[Wired LAN]
<Projector name>: Setting a projector name helps you identify each of the
projectors that are connected to the network.
• You cannot set a projector name starting with ERR.
<DHCP>: When <DHCP> is set to [Use], an IP address is automatically assigned
to the projector by a DHCP server. In case of a network that an IP address cannot
be assigned automatically, set <DHCP> to [Not use].
When <DHCP> is set to [Not use], ask your network administrator for IP address,
subnet mask, and gateway, then set the following items manually:
<IP address>: This is a unique number assigned for a terminal to connect to a
network. The format is a quartet of 3-digit decimal number. (Example:
111.112.xxx.xxx)
Description
[
: Select item]
Not use
Cancel]
[
: Select item]
Off
Cancel]
[
: Select item]
Off
Cancel]
46
<Subnet mask>: For dividing the network, the subnet mask determines the range
of an IP address assigned to a terminal. (Example: 255.255.xxx.xxx)
<Gateway>: Gateway specifies a network device like a router when accessing a
server outside the network. It is identified by an IP address. (Example:
111.112.xxx.xxx)
[Email]
<Status notification>: Sends alarm information to the specified E-mail address
when an error such as lamp blowout occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port number>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)
[PJLink]
<PJLink authentication>: Set whether or not to authenticate the user by password
when the projector is accessed via the PJLink-compliant Software Application. (Set
[On] or [Off].).
<Password>: Enter a password for confirmation when the above <PJLink
authentication> is set to [On].
Precautions
• When purchased, <PJLink authentication> is set to [Off] and <Password> is not
set by factory setting. You are recommended to make authentication setting as soon
as possible.
• If you forget a password, set it again.
Character entry
Enter characters using numeric keys of the remote control.
The character is entered with a beep sound if the beep sound is set to [On].
Character entry mode
Remote
Items using characters, numbers, and symbols
control
(e.g., projector name and destination address)
button
"1" "."
"@"
"-"
"_"
"2" "A"
"B"
"C"
"a"
"b"
"3" "D"
"E"
"F"
"d"
"e"
"4" "G"
"H"
"I"
"g"
"h"
"5" "J"
"K"
"L"
"j"
"k"
"6" "M"
"N"
"O" "m"
"n"
"7" "P"
"Q"
"R"
"S"
"p"
"8" "T"
"U"
"V"
"t"
"u"
"9" "W" "X"
"Y"
"Z"
"w"
"0"
"space!"#$%&'()*+,-./:;<=>?@[ ]^_`{
Deletes one character.
47
Number only
"1"
"c"
"2"
"f"
"3"
"i"
"4"
"l"
"5"
"o"
"6"
"q"
"r"
"s"
"7"
"v"
"8"
"x"
"y"
"z"
"9"
}~"
"0"
Deletes one character.