Introduction; Unpacking - Martin Audio ICT300 User Manual

<
CONTENTS
Standards Applied
1
Thank you for purchasing a Martin Audio M1 system controller and ICT300
compact loudspeaker system. The M1 is used to optimise the performance
of the ICT300, whether it is used as a stand-alone system or with additional
sub-bass enclosures.
2
Every Martin product is built to the highest standard and thoroughly
inspected before it leaves the factory. After unpacking the unit, examine it
carefully for any signs of transit damage and inform your dealer if any such
damage is found. It is suggested that you retain the original packaging so
that the unit can be repacked at a future date if necessary.
Please note that Martin Audio and its distributors cannot accept
responsibility for damage to any returned product through the use of non-
approved packaging.
>
PRINT
This equipment conforms to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC
and 93/68/EEC and the requirements of the Low
Voltage Directive 73/23/EEC, amended by 93/68/EEC.
EMC Emission
Immunity
Electrical Safety

INTRODUCTION

UNPACKING

Martin Audio – M1 and ICT300
EN55103-1:1996
EN55103-2:1996
EN60065:1993 (ICT300)
EN60065:1998 (M1)
2
GUIDES