Unpacking - Desa 160-IF Owner's Manual

SAFETY INFORMATION
Continued
18. Never move, handle, refuel or service a hot,
operating or plugged-in heater.
19. Never attach heater to external fuel tank.
20. Heaters used in the vicinity of tarpaulins,
canvas or similar enclosure materials shall be
located a safe distance from such materials.
The recommended minimum safe distance is
10 feet (304.8cm). It is further recommended
that these enclosure materials be of a fire
retardant nature. These enclosure materials
shall be securely fastened to prevent them
from igniting or from upsetting the heater due
to wind action.
21. Unplug heater when not in use.
22. Never block air inlet (rear) or air outlet (front)
of heater.

UNPACKING

MODEL 160-IF
1. Remove all the materials used to package the
heater for shipment.
2. Open the carton from the top.
3. Remove the flue connection from carton (see
Figure 1).
4. Lift up and remove cardboard packaging.
5. Unscrew the locking screws on wheel-lock
straps (see Figure 1).
6. Insert the flue connection onto the flue outlet
tube (see Figure 4).
7. Carefully lower the heater from pallet.
114909-01A
Hot Air
Output
Lower
Shell
www.desatech.com
Flue Connection
Upper
Shell
Control
Power
Panel
Cable
Fan
Guard
Fuel Tank
Cap
3