Denon AVR-4802R Control Protocol page 6

COMMAND PARAMETER
Z2 PHONO
|
MD/TAPE2
SOURCE
UP
DOWN
**
ON
OFF
SR PHONO
|
MD/TAPE2
SOURCE
SV DVD
VDP
TV
DBS/SAT
VCR-1
VCR-2
VCR-3
V.AUX
SOURCE
SD AUTO
PCM
DTS
RF
ANALOG
EXT.IN-1
EXT.IN-2
function
MULTI ZONE-2 mode set , and select source
---The name of PARAMETER is
the same as that of the time of SI COMMAND.
MULTI ZONE-2 mode cancel
MULTI ZONE-2 VOLUME UP/DOWN , direct change to ***dB Z2UP<CR>
**:00 to 99 by ASCII , 80=0dB
MULTI ZONE-2 ON/OFF change
---Invalid at AVR-4802R
REC SELECT mode set , and select source
---The name of PARAMETER is
the same as that of the time of SI COMMAND.
REC SELECT mode cancel
VIDEO SELECT mode set , and select source
VIDEO SELECT mode cancel
set DIGITAL INPUT AUTO mode
set DIGITAL INPUT force PCM mode
set DIGITAL INPUT force DTS mode
set DIGITAL INPUT force RF mode
set force ANALOG INPUT mode
set EXT.IN-1 mode ---Set EXT.IN mode at AVR-4802R
set EXT.IN-2 mode ---Invalid at AVR-4802R
- 6 -
example
Z2PHONO<CR>
|
Z2MD/TAPE2<CR>
Z2SOURCE<CR>
Z2DOWN<CR>
Z280<CR>
Z2ON<CR>
Z2OFF<CR>
SRPHONO<CR>
|
SRMD/TAPE2<CR>
SRSOURCE<CR>
SVDVD<CR>
SVVDP<CR>
SVTV<CR>
SVDBS/SAT<CR>
SVVCR-1<CR>
SVVCR-2<CR>
SVVCR-3<CR>
SVV.AUX<CR>
SVSOURCE<CR>
SDAUTO<CR>
SDPCM<CR>
SDDTS<CR>
SDRF<CR>
SDANALOG<CR>
SDEXT.IN-1<CR>
SDEXT.IN-2<CR>