System Setup Items And Default Values (Set Upon Shipment From The Factory) - Denon S-101 Operating Instructions Manual

ENGLISH
System Setup

System setup items and default values (set upon shipment from the factory)

OSD LANGUAGE
DIALOG
LANGUAGE
SETUP
SUBTITLE
DISC MENUS
TV TYPE
VIDEO
SETUP
PROGRESSIVE MODE
SPEAKER SETUP
AUDIO
SETUP
INPUT MODE
DIGITAL OUT
LPCM (44.1 kHz/48 kHz)
COMPRESSION
AUDIO DELAY
Setup items
Set the OSD setup display language for modes other than playback
and pause.
Set the language of the sound output from the speakers.
Set the language of the subtitles displayed on the TV.
Set the language of the menus recorded on the disc (top menu, etc.).
Set your TV's video format (NTSC, PAL or MULTI).
Set the progressive mode (AUTO, FILM, VIDEO).
At the listening position, listen to the test tones
CHANNEL
output from the different speakers and set so that the
LEVEL
playback level from the different speakers is equal.
This parameter is for optimizing the timing with which
DISTANCE the audio signals are produced from the speakers and
subwoofer according to the listening position.
SPEAKER To achieve the best acoustics, set the location of the
LOCATION speakers and the conditions in the room.
When DVD or AUX was selected as the input function, use this to
select the input mode.
Use this to select the digital output's signal format.
Use this to set the digital audio output when playing DVDs recorded
in linear PCM audio.
Use this to adjusts the dynamic range of the Dolby Digital or DTS
sound.
Use this to synchronize the sound and video.
Default settings
ENGLISH
ENGLISH
OFF
ENGLISH
NTSC
AUTO
TEST TONE FRONT LCH
OFF 0 dB
FRONT FRONT
DISTANCE
LCH RCH
FEET 9 ft 9 ft
LOCATION
2:ON SHELF
AUTO
NORMAL
OFF
OFF
0 mSEC
55
ENGLISH
Page
43
43
43
43
45
45
FRONT RCH SUBWOOFER
47, 48
0 dB 0 dB
SUBWOOFER DEFAULT
48, 49
9 ft ON
ROOM DAMPING
49, 50
MID
46
46
46
47
47
System Setup