Denon AVR-983 Operating Instructions Manual page 50

Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together.
Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1
(Remote control unit)
The channel switches in the order shown below each time
this button is pressed.
FL C
FADER
2
Press the 0 button to reduce the volume of the front
channels, the 1 button to reduce the volume of the rear
channels.
(Remote control unit)
The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
Dolby Surround Pro Logic
1 Select the Dolby Surround Pro Logic II mode.
• The Dolby Pro Logic indicator lights.
SELECT
(Main unit)
2
Play a program source with the
• For operating instructions, refer to the manuals of the respective
components.
50
Select "FADER".
FR SR SBR SBL
SW SL
The fader function does not affect
the SW channel.
II mode
1 3, 5 1, 4, 6
Light
Display
(Remote control unit)
mark.
2
This is only displayed when setting the fader control.
1
2
1
The Dolby Surround Pro
Logic II Cinema or Music
mode can be chosen directly
by pressing the CINEMA or
MUSIC button on the
remote control unit during
playback in the Dolby
Surround Pro Logic II mode.
3
4, 5, 6