Tone Control Setting - Denon AVR-5800 Operating Instructions Manual

Tone control setting

• Use the tone control setting to adjust the bass and treble as desired.
1
Display the surround parameter
screen on the monitor.
(Remote control unit)
2
Press the CURSOR/PAGE button to
highlight the display, then use the
jog stick to set the parameters.
Select "TONE".
(Remote control unit)
3
Switch to the Tone Control screen.
(Remote control unit)
4
B To select Bass or Treble.
(Remote control unit)
5
Enter the setting.
The surround menu screen re-appears.
(Remote control unit)
6
Press the CURSOR/PAGE button so that the display is no longer highlighted, then press the "SURR. PARA" button to
complete the setting.
(Remote control unit)
50
The screen for the selected
surround mode appears.
"TONE" cannot be selected in
the Direct or Home THX Cinema
mode.
B To set the level.
If you do not want the tone to be adjusted, set "Tone Defeat" to "ON".
(See page 35.)
2, 3, 4, 5
1, 4
(Remote control unit)