Kyocera FS C5015N - Color LED Printer User Manual page 97

J Job accounting
printed by each account ID. Account IDs can be assigned at the printing system and stored
in the driver. After account IDs are assigned, use Job accounting to print in the Copy
Management mode.
K
KM-NET
Kyocera image refinement
graphics.
M
Mailbox
optional device such as a Sorter stacker, Document finisher, or Mailbox is installed.
Monochrome
MP tray
media.
O
Offset jobs
feature requires an optional finishing device such as an Internal finisher or 1000-sheet
finisher.
P
PDL
printing system how to print a document. Availability of some printing options depends on the
selected PDL. Available page description languages are PCL XL, PCL 5e (monochrome
models only), and KPDL.
Poster
by the printer so the cumulative sheets can be assembled as a poster. Use this feature to
print a document in a large, eye-catching poster format, up to 25 times larger than the original
document size.
PRESCRIBE
specified locations in a print job. See also Prologue/Epilogue.
Private print
digit Access code and stores them on the Hard disk. The job is printed out at the operation
panel by using the Access code.
Profile
select a profile by name and apply its settings to a print job without selecting each feature
individually.
Prologue/Epilogue
locations in the print job. An advanced user may choose to use this feature to embed a
PRESCRIBE command that will call a macro to overlay PRESCRIBE form data or a graphic
object, such as a logo or a signature, at a specific point in the print job.
Proof and hold
remaining copies on Hard disk. After the first copy has been reviewed, the remaining copies
can be printed or deleted at the printing system's operation panel. Proof and hold jobs are
stored temporarily and are deleted when the printing system is reset or powered off.
User Guide
An accounting system that records and controls the number of pages
Software that provides network-wide management of printers and copiers.
Print job destination option that distributes print jobs to output trays when an
Imaging mode that uses black toner only.
Source tray used for labels, transparencies, envelopes, and custom printing
Finishing mode that physically shifts each print job in the output tray. This
Page Description Language. This is the language used by your computer to tell the
Layout feature for printing a document in a larger size than the maximum supported
Kyocera's scripting language that you can use to embed commands into
Job feature that sends secure print jobs to the printing system with a four-
A set of user defined driver settings that you save as a group. After saved, you can
Advanced feature that allows you to insert a macro into specific
Job feature that prints one copy of a multiple copy job and then stores the
Imaging feature that smoothes the edges of text and vector
-
Glossary - 2