Kyocera FS C5015N - Color LED Printer User Manual page 70

Supported models: fs-820, fs-920, fs-1118mfp, fs-1030d, fs-2000d, fs-3900dn, fs-4000dn, fs-6950dn, fs-9130dn, fs-9530dn, fs-c5015n, fs-c5020n, fs-c5025n, fs-c5030n, fs-c8100dn, km-1820, km-2540, km-2560, km-3040, km-3050, km-3060, km-4050, km-5050, km-603
Hide thumbs Also See for FS C5015N - Color LED Printer:
Table of Contents

Advertisement

Job
4
1
2
3
4
5
6
1
2
3
4
5
8-7
and password must have been already added to the Custom box list. See
Custom Boxes in the Driver
Make a selection, type in a box number and password if needed, and then click
Click OK to close the Properties dialog box, and then click Print. The job is saved
to the specified Custom box and held for printing.
Print Jobs in Custom Boxes
Jobs are printed from the printing system's operation panel.
At the printing system's operation panel, press the Document Box key.
A list of custom boxes appears. Select a box and press Open.
A list of documents saved in the custom box appears. To select a document to print,
press the checkbox in the left hand column. A checkmark appears.
Press Print.
A window with printing options appears. Here you can select options like duplex,
staple, and paper size. For complete information on print settings that can be set at
the operation panel, see your printing system's Operation Guide.
To print the document, press the Start key.
Quick Copy
After using the quick copy feature, a document can be reprinted from the operation
panel.
In the Properties dialog box, click the Job tab.
Select the Job storage (e-MPS) check box, and then select Quick copy.
You can name the job for later reference when printing from the printing system's
operation panel. Under Job name, select Application defined for automatic naming
by the application. Or, select Custom to type in a name of your choice. The name
can be up to 79 characters.
With Application defined (display application name and Job name) selected for
Microsoft Word or Power Point jobs only, you can choose to display only the Job
name, up to 32 characters, in the job list and at the operation panel message. Job
name is the same as the document name. To remove the application name, select
Don't use application name.
Click OK.
When you Print from the application, the job is saved to the hard disk while the
specified number of copies prints.
on page 8-3 for instructions on adding a Custom box.
Set Up
OK.5
6
1
2
3
4
5
6
1
2
3
4
5
KX Driver

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents