Konica Minolta bizhub 20 Quick Manual page 14

USB
17
Connect the USB cable
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
computer.
a
Remove the label covering the USB interface
connector.
b
Connect the USB cable to the USB connector
on the machine marked with the
Then connect the cable to your computer.
14
18
a
Plug the AC power cord into an AC outlet. Turn
the power switch on.
The installation will continue automatically.
The installation screens appear one after
another.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
19
symbol.
a
Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
Note
If an error message appears during the software
installation, run the Installation Diagnostics
located in Start/All Programs/KONICA
MINOLTA/bizhub 20.
Finish
Windows
Connect the power cord
Finish and restart
The installation is now
complete.
®