ENGLISH
Advanced Operation
<ON/STANDBY>
[OFF]
[INPUT SELECTOR]
[ENTER]
[MODE SELECTOR 1]
[ZONE2 OFF]
[INPUT SELECTOR]
[MODE]
[ENTER]
About the button names in this explanation
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Use this procedure to view photo and video data stored on the iPod
on a monitor.
1
[MODE]
Press
Browse mode to the Remote mode.
• "Remote iPod" is displayed on the AVR-687's display.
[CHANNEL]
2
Watching the iPod's screen, press
"Photos" or "Video", then press
• The iPod's photo and video data are displayed on the monitor.
• To output photo or video data recorded on the iPod to the monitor,
[VOLUME]
the iPod's "TV Out" setting (under "Video Settings") must be set to
"ON".
For details, refer to the iPod's operating instructions.
[D H F G]
Disconnecting the iPod
[MODE SELECTOR 2]
< ON/STANDBY >
Press
power to the standby mode.
[ZONE2 ON]
The iPod can be disconnected after switching to a function other
than the one to which the iPod input is assigned.
[D H F G]
for at least 2 seconds to switch from the
[D D H H ]
to select
[G G ]
[ENTER]
or
.
[OFF]
or
and set the AVR-687's
35
ENGLISH
Advanced Operation