Tone Control - Denon AVR-588 Owner's Manual

SB CH OUT
(for Multi-channel sources
Select playback mode for surround back channels.
[Selectable items]
OFF
: No signal is played from the surround back
channels.
NON MTRX
: The same signals as those of the surround
channels are output from the surround back
channels.
MTRX ON
: The surround channel signals undergo digital
matrix processing and are output from the
surround back channels.
z1
PL II x CINEMA
: Decoded in Dolby Pro Logic
surround back signal played.
z2
PL II x MUSIC
: Decoded in Dolby Pro Logic
surround back signal played.
z3
ES MTRX
: DTS signal played with digital matrix processing.
z4
ES DSCRT
: Signal included in DTS-ES Discrete 6.1-channel
sources played.
z1: This can be selected when "Surround Back Speaker" is set to
"2spkrs" at "System Setup" – "Speaker Setup" setting (vpage
20).
z2: This can be selected when "Surround Back Speaker" is set to
"2spkrs" or "1spkr" at "System Setup" – "Speaker Setup"
setting.
z3: This can be selected when playing DTS sources.
z4: This can be selected when playing DTS sources including a
discrete 6.1-channel signal identification signal.
) SB CH OUT
(for 2-channel sources)
Determine whether to use surround back speakers.
[Selectable items]
ON
: The surround back channel signal is played.
OFF
: The surround back channel signal is not played.
SUBWOOFER ATT.
Attenuate subwoofer level when using EXT. IN mode.
[Selectable items]
ON
: The input from the subwoofer channel is attenuated.
II x Cinema mode,
OFF
: The input from the subwoofer channel is not attenuated.
II x Music mode, Usually use in this mode.
Set this to "ON" if the subwoofer channel level seems too high when
playing audio signal.
Subwoofer
Turn subwoofer output on and off.
[Selectable items]
ON
: The subwoofer is used.
OFF
: The subwoofer is not used.
Default
Resets the settings to the default values.

Tone Control

Adjust the tonal quality of the sound.
Tone Defeat
Turn tone adjustments off.
[Selectable items]
ON
: Playback without tone adjustment.
OFF
: Allow tone adjustment (treble, bass).
The tone cannot be adjusted when in the DIRECT mode.
Bass
Adjust low frequency range (bass).
[Variable range] –14dB ~ 14dB
Treble
Adjust high frequency range (treble).
[Variable range] –14dB ~ 14dB
"Bass" and "Treble" can be set when "Tone Defeat" is set to "OFF" .
ENGLISH