Example Of Display Of Default Values; Speaker Setup; A ~ H Speaker Configuration; Subwoofer Mode Setup - Denon AVR-588 Owner's Manual

Example of Display of Default
Values
In lists of selectable items or adjustable ranges, the item
surrounded by a border is the default value.
[Selectable items] Large Small

Speaker Setup

Perform this setting if you wish to make the settings for your
speaker systems manually.
a ~ h Speaker Confi guration

Subwoofer Mode Setup

j
k ~ A5 Distance
A6 Crossover Frequency
Test Tone
A7
a ~ h Speaker Confi guration
Select speaker confi guration and size.
(bass reproduction capability)
[Display]
1 . S p 2 . I n 3 . O p
S p e a k e r S e t u p
1 F r o n t L a r g e
6 S u b w o o f e r Y e s
Front Speaker
Select front speaker size.
[Selectable items] Large Small
Center Speaker
Select center speaker use and size.
[Selectable items] Large
Surround Speaker
Select surround speakers use and size.
[Selectable items] Large
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items]
NOTE
By default, the AVR-588's "Amp Assign" setting is set to "ZONE2" . To
use as the surround back speaker for the main zone, change the "Amp
Assign" setting (vpage 24).
Subwoofer
Select subwoofer use.
[Selectable items]
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
Q frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Q
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
Q
2spkrs 1spkr
:
Select the number of surround back speakers.
Small None
Small None
( )
Large Small None
( )
2spkrs 1spkr
Yes No
• Select "Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at "Crossover Frequency" (vpage
21).
• When "Front Speaker" is set to "Small" , "Subwoofer" is automatically
set to "Yes" .
• If "Subwoofer" is set to "No" , "Front Speaker" is automatically set to
"Large" .
• If "Surround Speaker" is set to "None" , "Surround Back Speaker" are
automatically set to "None" .
• When using just one surround back speaker, connect it to the left
channel (SBL).
j Subwoofer Mode Setup
Select low range signal to be reproduced by subwoofer.
[Display]
1 . S p 2 . I n 3 . O p
S p e a k e r S e t u p
7 S W M o d e N o r m
[Selectable items]
LFE (Normal)
: Play low range and LFE signal of channels set to
"Small" .
LFE+Main
: Play low range and LFE signal of all channels.
• This can be set when "System Setup" – "Speaker Setup" –
"Subwoofer" is set to "Yes" .
• Play music or a movie source and select the mode offering the
strongest bass.
• Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
Operations (vpage 19)
ENGLISH
Q
Q
0