Removing Remaining Directories - Lexmark Dot Matrix Manual

1
If you are using Sun Solaris, HP-UX, or an IBM AIX system, remove the menu links by running the following utilities
and selecting Remove before uninstalling the package.
# /usr/lexprint/bin/cde_menu_utility.sh
2
If you are using Sun Solaris, run the uninstall script to remove symbolic links created during installation.
Note: You must unlink the files before uninstalling the package.
# /opt/lexmark/LEXPrtDrv.unlink

Removing remaining directories

Package removal utilities usually do not remove directories shared by more than one package. After you remove all
of the printer drivers packages, you may need to remove some directories manually.
To see if any directories remain after removing all the packages, check the directory where you installed the printer
drivers. By default, the printer drivers are installed in either of the following locations:
•
Solaris
/opt/lexmark/unix_prt_drivers
/var/spool/lexmark/unix_prt_drivers
•
HP-UX
/opt/lexmark/unix_prt_drivers
/usr/spool/lp/lexmark/unix_prt_drivers
•
Linux
/usr/local/lexmark/unix_prt_drivers
/var/spool/lexmark/unix_prt_drivers
•
AIX
/usr/lpp/lexprint
/var/spool/lexmark/unix_prt_drivers
Note: Other software may be located in the /opt/lexmark, /usr/local/lexmark, /usr/spool/lp/lexmark,
or /var/spool/lexmark directories. If there is additional software residing in these locations, do not delete the directory.
14