NOTE:
1. Always keep the POWER switch on the main unit turned on.
2. Turn the power on and off from the remote control unit.
3. Unplug the power cord when you do not plan to use the unit for a
long period of time.
CAUTION:
If only the MUTE/STANDBY LED is lit red, this means that the
power is turned off from the remote control unit. Turn the
power on from the remote control unit.
- TABLE OF CONTENTS -
z
DESIGNATIONS AND
FUNCTIONS OF PANEL CONTROLS ..............................4 ~ 7
x
.........................................................7, 8
OPERATION ..................................................................9
v
SPECIFICATIONS ............................................................13
Please check to make sure the following items are included with
the main unit in the carton:
(1) Operating Instructions ......................................................1
(2) Warranty ........................................................................1
(4) Batteries R03 (AAA) .........................................................2
(6) Service Station List ............................................................1
1 DESIGNATIONS AND FUNCTIONS OF PANEL CONTROLS
Front Panel
!1
B
MUTE/STANDBY
POWER
¢ ON/STANDBY
£
OFF
REMOTE SENSOR
PHONES
q
w
e
4
!0
SOURCE DIRECT
¢ ON
£
OFF
BASS
TREBLE
BALANCE
LEFT
r
t
y
PRECAUTIONS FOR INSTALLATION
For heat dispersal, leave at least 10 cm of space between the top,
back and sides of this unit and the wall or other components.
VOLUME
RIGHT
u
10cm or more
B
INPUT SELECTOR
TAPE-2/MD TAPE-1/CD-R
PHONO
CD
TUNER
REC OUT SELECTOR
CD
TUNER
PHONO
TAPE-1 2
AUX-1
1
COPY
AUX-2
i
o
Wall
DVD/AUX-1 AUX-2/P. DIRECT