Honeywell HPTV2404 Product Installation Document

Honeywell Power Products
12 Clintonville Road
Northford, CT 06472
http://www.honeywellpower.com
CCTV Power Supply and Distribution Units
1 Overview
The HPTV2404 and HPTV2404CB are CCTV power supply and distribution units. They provide a constant source of
24 VAC with 4 A supply current. Four individual outputs route power to operate CCTV Cameras and other video
accessories. For overload protection the HPTV2404 uses automotive style fuses and the HPTV2404CB has auto-
resettable PTCs.

2 Specifications

• Input 115 VAC, 60 HZ, 1 A.
• 4 A, 24 VAC (100 VA) supply current.
• Four outputs
Note: Individual Output Circuits can be loaded to 3.0 A on HPTV2404 or 2.0 A on HPTV2404CB provided the total
current from all output combined is limited to 4.0 A.
• Surge and transient protection.
• Transformer has built in thermal protection.
• LED Indicator Lights:
– Input Power LED (Green) – ON indicates that 24 VAC is present at distribution board
– Output Power LEDs (4 Green) – ON indicates that 24 VAC is present at the related output circuit.
• Overload Protection (HPTV2404):
– Terminal Block Fuse: 3 A, 250 V, 5x20MM Cartridge
– Main Secondary Fuse: 5 A, 32 V, Automotive Style
– Individual Output Circuit Fuses: 3 A, 32 V, Automotive Style
• Overload Protection (HPTV2404CB):
– Terminal Block Fuse: 3A, 250V, 5x20MM Cartridge
– Individual Output Circuit PTC: Hold Current (2.0 A at 50°C)
– SPECIAL NOTE: To reset a PTC that has experienced an overload or short circuit, disconnect power for 5 minutes
to allow the PTC to reset itself.
• Power ON/OFF switch.
• AC line cord included.
• Unit maintains camera synchronization.
• Vented enclosure with hinged door and five convenient knockouts.
• Design for quick installation.
• Maximum temperature range 32°F to 120°F (0°F to 49°C); indoor use only.
• Cabinet dimensions 11.5" W x 4.875" D x 10" H (29.21 cm W x 12.38 cm D x 25.4 cm H)

3 Installation Instructions

1. Unpack product and discard all packing materials.
2. Pre-drill holes where enclosure is to be mounted.
HPTV2404(CB) PRODUCT INSTALLATION DOCUMENT
HPTV2404(CB):
PN 52404:A 01/17/2005 ECN 04-507