Preparing For Service; Required Tools; Transporting Generator - Honeywell HW5500 - 5500 Portable Generator Service Manual

5: PREPARING FOR SERVICE

ANYONE using or servicing this generator must read, understand, and follow all safety and operation instructions provided in
this manual. Failure to closely follow these instructions can result in circumstances leading to death, serious injury, and prop-
erty damage.

5.1 REQUIRED TOOLS

A complete set of standard and metric shop tools are
required to service the generator. Also needed are:
•
Hammer
•
Torque wrench
•
Volt-ohm meter
•
Frequency meter
•
Resistive load - such as a load bank, heaters, light
bulbs, etc.
•
Alternator removal tool
•
Wood block (for rotor support)
Honeywell Portable Electrical Generator Service Manual
WARNING

5.2 TRANSPORTING GENERATOR

Hot engine or exhaust system can cause serious
burns or fires. Cool generator completely before
transporting.
When moving or transporting the generator:
•
Press the engine control switch to the STOP position.
•
Turn the fuel shut-off valve to the OFF position.
•
Keep the generator level to prevent fuel spillage.
•
Place pins in the handle and handle bracket before
moving the generator.
NEVER drop, strike, or place heavy objects on generator
when transporting.
WARNING
NOTICE
www.honeywellgenerators.com 5-1