On-Screen Display - Denon ADV-M51 Operating Instructions Manual

ENGLISH

16 ON-SCREEN DISPLAY

• The ADV-M51 is equipped with an on-screen display ("OSD") function that displays various types of information on the surround functions and
the disc on the screen when the function is set to DVD.
q Setup screen
• This is used to select the speaker system being used (quick system setting) and to change the function of the ADV-M51 and various settings
when playing discs (system setting change and DVD setting change).
• The setup screen can be used regardless of the currently set function.
w Display of disc information
• When the function is set to DVD, the OSD displays information on the disc and appears when various playback functions are operated.
e Display of surround function
• When the function is set to DVD, information on the surround amplifier is also displayed and can be operated.
• The OSD for the surround function (AV OSD) can be turned on and off.
(The OSD for the setup screen and DVD disc information cannot be set to "OFF".)
Set to "ON" upon shipment from the factory.
B
DVD SURROUND RECEIVER ADV-M51
ON / STANDBY
62
2 1
SURROUND / SELECT
PUSH - PARAM.
- +
MENU/SET
TONE / SDB
VOLUME
FUNCTION
PHONES
OFF ON
VCR
REC
SLEEP NTSC/PAL TITLE TIME
SOURCE TV IN T V
ENTER CHARAC. EDIT/MENU
CLEAR A-B REPEAT SLIDE MODE ZOOM
- +
TV CH TV CH
CD SRS
PROG/DIRECT REPEAT RANDOM SEARCH MODE
MODE MEMO BAND
TUNING /
DVD TUNER D.AUX TV VOL
+
1 2 3
MD/LINE-1 TAPE /LINE-2
-
4 5 6
5CH STEREO AUTO DECODE TUNER
+
7 8 9
CH
DIRECT STEREO VIRTUAL
-
+ 10
0
CALL
/10
TEST TONE INPUT MODE SURROUND FUNCTION
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
1 2 +
DVD
8 9
-
6 7
STATUS
1
3 MUTING
SETUP TONE /SDB
2
ENTER
SURROUND
CH SELECT PARAMETER
- +
VCR CH
RETURN DISPLAY MENU TOP MENU
ANGLE AUDIO SUB TITLE
RC-936
1 With the function set to DVD, press the STATUS button of the
remote control for at least 2 seconds.
Press in the MENU/SET button on the main unit, then press
the MENU/SET button again for at least 2 seconds while
"STATUS" is displayed.
BAND
• "AV OSD ON
2 Turn the AV OSD on or off.
After several seconds, the display turns off and the setting is
made.
NOTES:
• Depending on the disc being played, the picture may be
disturbed when the OSD turns on. This is not a malfunction.
If this should happen, set the AV OSD to "OFF".
• The OSD is also output to the VCR video output terminals.
Do not perform setup or OSD operations while recording with a
video deck.
: OFF" is displayed.
0 1
MENU /SET
Main unit Remote control unit
SURROUND / SELECT
PUSH - PARAM.
Main unit Remote control unit
or :ON
0
or :OFF
1
STATUS