Stopping Playback; About The Dvd Standby Function; Auto Power Off Function; Operating The Surround Functions - Denon ADV-M51 Operating Instructions Manual

ENGLISH
6
Use the cursor buttons ( • , ª,
item.
• For some discs there is a second menu screen. If so, press
the 9 button to display the next menu screen. (See the
disc's jacket.)
The cursor buttons ( • , ª,
CDs. Use the number buttons to select the desired item.
7 Press the ENTER button.
• The desired item is selected and playback starts.
• You can return to the menu screen by pressing the TOP
MENU button while the DVD is playing, though this
depends on the disc.
• Press the RETURN button during playback of a video CD to
return to the menu screen.
Example: When "Apple" is
selected
TOP MENU
Apple Banana
Orange Strawberry
Peach Pineapple

(4) Stopping Playback

1 During playback, press the STOP button on the main unit or
the remote control unit, playback stops and wall paper is
displayed.
<Resume play memory function (DVD only)>
ADV-M51
• With the
position is stored in the memory. At this time, "1" flashes
on the display. When the PLAY button is pressed after
pressing the STOP button, playback resumes from the
position at which it was stopped.The resume play memory
function is canceled if the disc tray is opened or the STOP
button is pressed a second time.

About the DVD standby function

When the ADV-M51's function is set to DVD, the DVD
standby mode is set automatically if the disc remains in the
stop mode for approximately 10 minutes.
• In the DVD standby mode, the DVD section's power is
off and output of the video signals is also off.
The ADV-M51's display reads "DVD standby" at this
time.
• When in the DVD standby mode, the power of the
sections other than the DVD section is on and function
switching and other operations can be performed on the
main unit and remote control unit. When a DVD control
button (the play/pause and button open/close buttons on
the main unit, the play button on the remote control unit,
etc.) is operated, the DVD section's power turns on
automatically and disc playback and opening/closing of
the disc holder can be performed.
42
) to select the desired
and
0 1
) do not work for video
and 1
0
Remote control unit
ENTER
Remote control unit
Apple
, when the STOP button is pressed, that
8 Either turn the main unit's main volume control or use the
main volume control buttons on the remote control unit to
adjust the volume.
M . V O L U M E - 2 0
VOLUME
Main unit
For detailed instructions on operations for the surround
modes and surround parameters, see "12 Operating the
Surround Functions" on pages 44 to 58.
• In the "AUTO" input mode, the signals of the disc being
played are identified, Dolby Digital, DTS or PCM decoding
is selected automatically and the disc is played.
• In the Dolby Virtual Speaker surround mode, the signals of
the disc being played are automatically decoded in Dolby
Digital or DTS then played in the Dolby Virtual Speaker
surround mode.
NOTES:
• If appears on the TV screen while buttons are being
operated, that operation is not possible on the ADV-M51 or with
that disc.
•
Set the disc in the disc guide.
• Only set one disc in the tray.
• The disc keeps turning while the menu screen is displayed on the
TV screen.
BAND
Main unit
The resume play memory function only works for
discs for which the elapsed time is shown on the
display during playback.

Auto power off function.

• The ADV-M51 is equipped with a function that
automatically switches the power to standby if no
operation is performed for 30 minutes while in the stop
mode with the function set to DVD.
• This function is set to off upon shipment from the
factory. If you wish to turn it on, set the "DVD AUTO
POWER OFF" setting to "YES" as described on page 38.
NOTE:
• The DVD standby function only turns off the power of the DVD
section. It is different from the DVD auto power off function set
with the system settings in Setup in that the DVD section
remains functional.
The volume is shown
on the display.
+
-
Remote control unit
2
Remote control unit