Blade Bolt Inspection - Alamo Industrial Machete 2 02986941C Operator's Manual

6.4 Blade Bolt Inspection

Inspect Blade Bolt Head daily for wear as followed:
Inspect the Blade Bolt Heads daily for abnormal wear. REPLACE BOTH BLADE BOLTS on
the Blades IMMEDIATELY if either blade bolts has:
• Visible cracks or
• If the blade bolt crown is worn off or
• If Blade Bolt has gouges or chipped areas.
Failure to replace abnormally worn blade bolts may lead to catastrophic failure of the blades and ejection of
the broken part which may cause serious bodily injury or death.
Always replace Blade Bolts with new bolts whenever replacing the Blades. OPS-U-0037
MACHETE 2 11/08
©2008 Alamo Group Inc.
OPERATION
Operation Section 3-22