Rvbmix, Fx Mix; Rvbinlvl, Fx Inlvl; Rvb In W, Fx In W - Lexicon PCM 81 - REV 2 User Manual

PCM 81
These effect block
controls are also found in
the Submixer row of each parameter matrix (pictured here).
Press Load/✱ to toggle between Rvb and FX parameters.
These parameters are described below, in the order in which they
appear in the Submixer row. (All other effect parameters are
identical to those described earlier for the 4-Voice and 6-Voice
algorithms.

RvbMix, FX Mix

These are independent wet/dry mix controls for the Rvb and FX
effect blocks.

RvbInLvl, FX InLvl

These are independent input level controls for the Rvb and FX
blocks.

Rvb In W, FX In W

These are input width controls for the Rvb and FX blocks. These are
essentially the same as the PCM 81 FX Width and Rvb Width
parameters. The difference is that the width control in the Pitch FX
algorithms is located at the input to the effect. This makes it
possible to independently alter the stereo image of material
feeding the two effect blocks.
1 1.0 1.1
Submixer Sends Returns
1.2 1.3 1.4
Routing *Mix *InLvl
These parameters provide independent control of input and output level and width,
as well as high cut and low cut parameters for each FX and Rvb block.
RvbHiCut, FX HiCut
These parameters provide independent 6dB per octave, stereo
high-cut filters on the outputs of the Rvb and FX blocks.
RvbLoCut, FX LoCut
These parameters provide independent 6dB per octave, stereo
low-cut filters on the outputs of the Rvb and FX blocks.
RvbOutLvl, FX OutLvl
These are independent output level controls for the Rvb and FX
blocks.
Rvb Out W, FX Out W
These parameters allow independent control of the stereo image of
the output of each effect block.
Algorithms and Parameters
1.5 1.6
1.7
*In W *HiCut *LoCut
1.8 1.9
*OutLvl *Out W
3-53