Program Bank X3; Dual Mono In/Stereo Out (0.0-2.9) - Lexicon PCM 80 - REV 0 DUAL FX User Manual

Presets 0.0-2.9 are configured as Dual Mono In/Stereo Out. The left input feeds a Mono
In /Stereo Out 4 voice effect. The right input feeds a Mono In/Stereo Out reverb. The
stereo outputs of the effect and reverb are mixed at the PCM 80's outputs. These presets
can be used to provide two independent stereo effects to a mono source, or to add stereo
processing to two different mono sources. They are not intended to be used with stereo
source material.
0.0 Trance
Similar to the DualTapGate programs. In this case, the inputs to the effects are opened
gradually over a cycle of several beats. The cycle for each effect is different. ADJUST
controls the depth of the input level cycle: 0 = no cycle (the inputs are always open full),
100 = -48dB (the inputs ramp up and down between full and -48dB.) T
0.1 DualTapGate1
The left and right inputs feed independent effects. We were thinking snare and kick when
we made this program with a bounce delay on the left and a large drum chamber on the
right. The inputs to both effects are gated rhythmically. The echoes are opened up once
every four beats, and the reverb is opened up once every two beats. ADJUST controls
how long the input of each effect is open with the rhythm cycle: 0 = always closed, 50 =
open for half the cycle, 100 = always open. T
0.2 DualTapGate2
A variation of DualTapGate1 with different rhythm and ADJUST settings. T
0.3 X-Eko + Rvb1
A dual mono-in/stereo-out program. The left input feeds a cross-rhythm echo. The right
input feeds a stereo chamber reverb. ADJUST controls the overall rate of the echo
rhythm. Use this preset to process two mono sources independently, or to process one
mono source with two independent effects. T
0.4 DuckEko+ Rvb1
The left input feeds a stereo bounce echo. The right input feeds a medium chamber.
ADJUST controls the echo cross feedback. The twist here is that the echo output level
is ducked 24dB whenever signal is detected at the right input. Run the same vocal into
both inputs and the echoes will fade up to punctuate the end of phrases. Or, try running
a vocal through the reverb, and a snare through the echo. The snare echoes will only be
heard between vocal phrases. T
0.5 Bounce+ Rvb1
A dual mono-in/stereo-out program. The left input feeds a triplet echo that bounces
between left and right as it repeats. The right input feeds a stereo chamber reverb.
ADJUST controls the echo feedback. Use this preset to process two mono sources
independently, or to process one mono source with two independent effects. T
0.6 Bounce+ Rvb2
This is a variation of Bounce+ Rvb1. In this version, the echo rhythm is a simple eighth-
note pattern. T
0.7 Bounce+ Rvb3
The echo rhythm has a swing feel in this variation of Bounce+ Rvb1. T
0.8 Bounce+ Eko1
A dual mono in/stereo out program. The left input feeds a sixteenth-note echo that
bounces between left and right as it repeats. The right input feeds a separate mono triplet
echo. ADJUST controls the bounce echo feedback. The Soft Row contains additional
controls for both effects. Use this program to process two mono sources independently,
or to process one mono source with two independent effects. T
ADJUST: Depth
ADJUST: GateWidth
ADJUST: GateWidth
ADJUST: Eko Rate
ADJUST: Eko X-Fbk
ADJUST: Eko Fbk
ADJUST: Eko X-Fbk
ADJUST: Eko X-Fbk
ADJUST: Bnce Fbk

Program Bank X3

Dual Mono In/Stereo Out
(X3 0.0 – X3 2.9)
0–100
0–100
0–100
0–100
0–100
0–100
0–100
0–100
0–100
The Presets
3-15