Table of Contents
Advertisement
Lexicon, Inc.
MC-8 Serial Communications Protocol
6.3.10.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-8 will ignore the command and
transmit a DC_NAK command with an error code DC_INVALID_DATA.
6.3.11 Set Front/Back Balance
Commands MC-8 to set the front/back balance to the value in this packet.
This command has been maintained for backward compatibility with MC-1. In order to maintain backward
compatibility, the MC-8 Parameters have been mapped to the MC-1 parameters as described in each Data
Description. MC-8 users should be using the command described in
6.3.11.1 Packet Description
Application Header:
Command DC_CMD_SET_FRONT_BACK_BALANCE
Data Count 1
Application Data:
Data[0]
6.3.11.2 Data Description
Value:
Data Type:
Max:
Conversion:
6.3.11.3 MC-8 Response
The MC-8 will assign the value from the packet to the front/back balance.
6.3.11.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-8 will ignore the command and
transmit a NAK command with an error code DC_INVALID_DATA.
6.3.12 Set Active Effect by Id
This command requests the MC-8 to set the active effect to the value in this packet.
This command has been maintained for backward compatibility with MC-1. In order to maintain backward
compatibility, the MC-8 Parameters have been mapped to the MC-1 parameters as described in each Data
Description. MC-8 users should be using the command described in
© 2003 Lexicon, Inc. All rights reserved.
Value
Unsigned 8 bit integer.
32
0 = Front
16 = Center
32 = Back
Printed on: 04/01/03
6.3.36
(MC-8_Set_Front_Back_Balance).
0x23
0x01
nn
6.3.37
(MC8_Set_Active_Effect_By_Id).
23 of 80
Advertisement
Table of Contents
