Canopy 400 Series OFDM AP and SM
The Disclosure Table (see Table 7) is intended only to communicate compliance with China
requirements; it is not intended to communicate compliance with EU RoHS or any other
environmental requirements.
6.3
EXPOSURE SEPARATION DISTANCES
To protect from overexposure to RF energy, install Canopy radios so as to provide and maintain
the minimum separation distances from all persons shown in Table 8.
Module Type
Canopy 400 Series OFDM AP or SM
Canopy Module (for comparison)
Section 6.3.1 and Table 9 give details and discussion of the associated calculations.
6.3.1
Details of Exposure Separation Distances Calculations and Power
Compliance Margins
Limits and guidelines for RF exposure come from:
US FCC limits for the general population. See the FCC web site at
•
http://www.fcc.gov, and the policies, guidelines, and requirements in Part 1 of Title 47
of the Code of Federal Regulations, as well as the guidelines and suggestions for
evaluating compliance in FCC OET Bulletin 65.
Health Canada limits for the general population. See Safety Code 6 on the Health
•
Canada web site at
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/99ehd-dhm237/index_e.html.
Version 1, April 2008
Table 7: Disclosure Table
Table 8: Exposure Separation Distances
SJ/T11363-2006
SJ/T11363-2006
Separation Distance from Persons
At least 20 cm (approx 8 in)
At least 20 cm (approx 8 in)
User Guide
Page 36 of 40