HP Sa3110 - VPN Server Appliance Getting Started Manual page 38

Using the VPN Client Deployment Tool for the First Time
4-12
Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide
The Tunnel Settings window appears.
Note: The Connection Type area applies to both SST and
IPSec tunnels.
10. Select the Logon to Network check box if you want the users
or groups to automatically log onto the network every time a
tunnel connects (for example, a Windows NT domain).
11. Select the AutoConnect check box if you want your users to
automatically connect to a VPN device every time the VPN
Client is started.
12. In the ACL (access control list) Match Method area, select
the User Identifier type you want your IPsec tunnels to use
for authentication:
Note: The ACL Match Method area is for use with IPSec
tunnels only.
• User's full email address — The client sends the user's
full e-mail address as entered in the Users window for au-
thentication (for example, jdoe@hp.com).
• Domain — The client sends just the domain name of the
user's e-mail address as entered in the Users window for
authentication (for example, hp.com).
• Other domain — Enter a domain of your choice in the
field after selecting this option. Although this can be any
text string or domain name, it should match an ACL rule
on the VPN device. Every user or group assigned to this
profile receives this domain name.
• Certificate distinguished name — The profile uses the in-
formation in the certificate distinguished name to match
an ACL rule on the VPN device. See the VPN device doc-
umentation for more information.
13. Enter the shared secret (password) for the ACL (Access
Control List) on the VPN device.