HP Sa3110 - VPN Server Appliance Getting Started Manual page 24

Installing the VPN Client Software Files
3-2
Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide
New directories are created on your Windows NT or Windows
2000 Server and the VPN Client software files are installed.
The VPN Client files are installed into subdirectories in the root
directory of your IIS FTP server (default directory
c:\Inetpub\ftproot
for each VPN Client installed to your hard disk.
When you have finished installing the software, you should have
a directory structure similar to the one listed here:
c:/Inetpub/ftproot/smdt/VPN-6.80-NAM
c:/Inetpub/ftproot/smdt/VPN-6.75-INT
NAM indicates the North American Release of the VPN Client
software. INT indicates the international release of the VPN
Client. Each of the directories that are created has appropriate
software subdirectories where the actual client software is
located. These directories are as follows:
• client95 — indicates the Windows 95/98 compatible client
• clientNT — indicates the Windows NT compatible client
• client2k — indicates the Windows 2000 compatible client
). At least 6 MB of disk space is required