HP Sa3110 - VPN Server Appliance Getting Started Manual page 19

8. Select the IIS Web Server Scripts directory that was created
when you installed IIS. To select the default directory, click
Next.
The Enter Information dialog box appears.
9. Enter the IP address of the database server. If the database
server is installed on the same computer as the VPN Client
Deployment Tool Manager, use the default IP address.
Otherwise, enter the Database server's IP address here.
Note: If your Manager/Database and Web server are on sep-
arate computers and you have a firewall installed between
them, you must allow access to the TCP port that the Web
server uses to connect to the database. By default this is
port 2638.
10. Click Next.
If you are installing JRun for the first time, the JRun
Information dialog appears.
11. Click OK.
The Setup Complete dialog box appears.
12. Select Yes, I want to restart my computer now.
13. Click Finish to restart your computer.
The VPN Client Deployment Tool Servlet is successfully
installed.
Next, you need to use the installproduct.bat utility to copy the
VPN Client software to your server. See "Installing the HP
SA3000 Series VPN Client Software Files" on page 3-1 for
detailed information.
Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide
Installing the VPN Client Deployment Tool
2-5