Western Digital WDA4NC20000 - ShareSpace NAS 2TB HD 1TB x 2 RAID User Manual page 76

Factory Restore
Note: For information about using the Reset button to return the password and
network mode to factory settings, see "Resetting the My Book Live" on
page 129.
In this area of the Settings page, the Administrator can choose a short factory
restore or a full one. The drive loses all information, and the Administrator password
returns to none.
Note: A Quick Factory Restore formats the drive, while a Full Factory Restore
securely erases the drive.
Important: You may want to export and save the drive's current configuration before
restoring factory default settings so that you can import it afterwards.
Note that importing a configuration in this case does not restore shares,
users, or Twonky.
If you want to restore the complete contents of a My Book Live including
user settings, backups, and data, use the safepoint feature described on
page 89.
To restore factory defaults:
1. For Restore Type, select Quick Factory Restore (default setting) or Full
Factory Restore and click the
2. When asked to confirm the action, click the Yes button to continue or the No
button to return to the Utilities page.
3. When the progress bar displays, if you selected Full Factory Restore in step 1,
but you change your mind, click the Change to Quick Restore button to start
a Quick Factory Restore from the beginning.
WARNING! Interrupting the factory restore process may damage the My
Book Live drive. Wait until after the reboot to use the drive
again.
At the end of the restore, the "Complete Restore Finished" message displays,
and the system reboots.
Reboot/Shutdown
You can safely reboot and shut down your My Book Live drive using two methods:
Use the Reboot/Shut Down section of the Utilities screen (discussed in this
section),
-OR-
MY BOOK LIVE
USER MANUAL
button.
Start
CONFIGURING BASIC SETTINGS
71