Western Digital WDA4NC20000 - ShareSpace NAS 2TB HD 1TB x 2 RAID User Manual page 137

If the LED is solid green (indicating the drive is idle) or blue (indicating the drive is on
standby), the drive is ready to shut down.
1. Disconnect the Ethernet cable.
2. Unplug the power cable.
If the LED is white, the firmware is being updated. DO NOT UNPLUG THE POWER
as this could corrupt the firmware in the drive and cause data loss.
If the LED is any other color, wait for it to turn green. If it does not turn green, please
consult "Checking the Front Panel LED" on page 10.
How do I upgrade from My Book Live 3.0 firmware to My Book Live 3.5
firmware?
For instructions, search the Knowledge Base at
Knowledge Base Answer 6742.
MY BOOK LIVE
USER MANUAL
TROUBLESHOOTING
http://support.wdc.com for
132