Western Digital WDA4NC20000 - ShareSpace NAS 2TB HD 1TB x 2 RAID User Manual page 34

If the backup mode is file and Ready to perform file backup appears there, then
click the Switch to Category Backup button and OK at the Switching Backup
Plan prompt.
b. Click Advanced View to open the backup by categories selection box:
c. In the backup by categories selection box:
• Clear the check boxes for the categories of files that you want to exclude
from the backup.
• As required, select the check boxes for the categories of files that you want to
include in the backup.
d. Click Apply Changes to create a custom backup plan and refresh the content
gauge for your external device.
e. Click Start Backup to begin backing up the selected categories of files
step 8 on page 31.
to
6. To back up all of the files and folders on the internal hard drive:
a. Verify that the backup mode is file and that Ready to perform file backup
appears at the upper-left corner of the Backup screen.
If the backup mode is category and Ready to perform category backup
appears there, then click the Switch to File Backup button and OK at the
Switching Backup Plan prompt.
b. In the backup by files selection box, select the check box for your computer's
internal hard drive:
If your computer has more than one internal hard drive or hard drive partition,
select the check box for each one.
c. Click Apply Changes to create a custom backup plan and refresh the content
gauge for your external device.
WD SMARTWARE SOFTWARE
USER MANUAL
BACKING UP YOUR COMPUTER FILES – 30
and skip