Table of Contents
Advertisement
Flail-Wing Mower PRE-OPERATION Inspection
Mower ID#________________
Date:
Before conducting the inspection, make sure the tractor engine is off, all
rotation has stopped and the tractor is in park with the parking brake
engaged. Make sure the mower is resting on the ground or securely blocked
up and all hydraulic pressure has been relieved.
The Operator's Manual is in the canister on the mower
All safety decals are in place and legible
The Mounting frame bolts are in place and tight
The Wing connection bolts & pins are tight
The Hydraulic Cylinders pins are tight
The Hydraulic Pump hose connections are tight
The Hydraulic Valve hose connections are tight
The Hydraulic Valve controls function properly
There are no leaking or damaged hoses
The Hydraulic Oil level is full
Blades are not broken, chipped, cracked or bent
Blade shackles are in good condition with no cracks
The Blade pins are properly retained
Their Guards/Deflectors are in good condition
The Driveline clutch is in good condition, not frozen
The Driveline tubes & u-joints have been lubricated
The Driveline yoke is securely attached to the PTO
The Gearbox oil level is full
The rear roller is in good condition and turns freely
Operator's Signature:
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
HYDRO 88 & 96 03/09
©2009 Alamo Group Inc.
OPERATION
________________
Item
Operation Section 4-17
Make ____________________
Shift
____________________
Condition at
Specific Comments if
Start of Shift
not O.K.
Advertisement
Table of Contents
