Step 3: Installing The Software; Step 4: Setting Up Goflex Home - Seagate GoFlex Home User Manual

2. Setting Up GoFlex Home – Windows

Step 3: Installing the Software

1. Power on your computer, then insert the GoFlex Home Installation CD.
Note: If you are setting up GoFlex Home on a computer or device without a CD-ROM drive, go to
www.seagate.com/goflexhomesupport to download the installation software.
2. When the Welcome screen opens, choose a language, then click OK.
A setup wizard opens.
TIP: If the Setup wizard doesn't open automatically, open Explorer, navigate to the CD,
then double-click SeagateDashboardSetup.exe.
3. Follow the on-screen instructions to install the Seagate Dashboard and Memeo Instant
Backup software applications.
4. When the installation is complete, click Finish, then continue with "Step 4: Setting Up GoFlex
Home".

Step 4: Setting Up GoFlex Home

TIP: Before you continue, make sure you have a pen and paper handy to keep track of the
names and passwords you need to create during setup.
When the software is installed, the GoFlex Home Setup wizard opens automatically. This may
take a few moments.
The wizard finds and connects your computer to GoFlex Home, then the Device Information
screen opens.
Figure 7: Adding Device Information
FreeAgent® GoFlex™ Home User Guide
Step 3: Installing the Software
12