The Picture Transfer Protocol (PTP) allows pictures to be automatically copied from a USB camera connected directly to the Iomega StorCenter ix2-200. When

Picture Transfer is turned on, and your camera is connected to your Iomega StorCenter ix2-200, the pictures are copied to the configured destination folder.

1. On the Picture Transfer page, click the switch on.

2. Optionally, you can also check Remove Copied Pictures From Camera to automatically delete the pictures from your camera once they have been

safely copied to your Iomega StorCenter ix2-200.

3. Click

to open the Select Folder pop-up window, and select a Share as the destination for your pictures.

Iomega StorCenter ix2-200

Table of Contents