Selecting Exchange Storage Group Components; Local Continuous Replication (Lcr); Selecting Storage Group Components To Host - HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS Server User Manual

1. Do one of the following:
• Enter the host name of a server that hosts Exchange (exactly as it is registered in the domain).
• Enter the IP address (IPv4) of a server that hosts Exchange.
2. Click Next to open the Select Storage Group Components page (see
"Selecting Exchange Server storage group

Selecting Exchange storage group components

Use the Select Storage Group Components page to select the Exchange storage group and storage
group components (mail stores, public stores, and logs) you want to host on your HP Storage System
and manage using ASM.
1. Do one of the following:
• Select the entire storage group (including all of its components) by checking the box next to
the storage group.
• Select individual storage group components by expanding the list and checking the boxes
next to the components.
You must select all the storage group components in a storage group if you want to run backups
or take snapshots of the Exchange storage group using ASM.
The table below lists the action ASM will perform for each storage group component selected.
Table 3 Selecting storage group components to host
Action
None
Allocate Space, Move Data
None, Already Managed
2. To view the properties for a storage group component, select the storage group component name
and then click Properties.
See "MailStore database
and "Log properties for storage
3. When you are done, click Next to open the Storage Allocation page (see
"Allocating space for

Local Continuous Replication (LCR)

If the Local Continuous Replication (LCR) feature is enabled in Microsoft Exchange 2007, you have
the option of migrating LCR components to your HP Storage System. LCR components are shown in
the Select Storage Group Components page in the wizard if this feature is enabled. They are selected
in the same manner as other Exchange components.
components" on page 15).
Description
Component's check box is not selected, so ASM will not perform any
action. Select check box to change action.
Storage space will be allocated and configured on your HP Storage
System. Component's data will be migrated to your HP Storage System.
Component's data is already hosted on your HP Storage System and
already managed by ASM. No action is possible.
properties" on page 51,
group" on page 51 for descriptions of the properties displayed.
components" on page 22).
HP StorageWorks X1000 Automated Storage Manager
"PublicStore database properties" on page 51,
15