Warranty - Lexicon I-ONIX U82S Owner's Manual

6. StereO ButtOn anD StereO LeD - MIc/LIne/InSt 1 anD
MIc/LIne/InSt 2
This button toggles between Stereo mode and Mono mode for the Mic/
Line 1 input (or Instrument 1 input) and Mic/Line 2 input (or Instrument 2
input). The LED lights when Stereo mode is on.
In Stereo mode (Stereo LED is on), the Instrument 1 and Mic/Line 1 input
signals are sent to the Left Main Out, while the Instrument 2 and Mic/Line
2 input signals are sent to the Right Main Out.
In Mono mode (Stereo LED is off ), each pair of input signals is mixed
together and sent to the Left and Right Main Outs as a mono signal. One
pair includes Instrument 1 or Mic/Line 1 and Instrument 2 or Mic/Line 2.
7. 48v LeD
Lights when phantom power is active for the Mic/Line 1 and 2 input pair.
Phantom power can be turned on for any combi-jack input pair via the 48V
buttons on the back panel. Dynamic microphones do not require phantom
power to operate, but are not harmed by it. Most condenser microphones
do require phantom power to operate. If you are unsure about the phantom
power requirements for your microphone, consult your microphone's docu-
mentation or contact the manufacturer.
8. InStruMent 2 LeD
Lights when a 1/4" plug is inserted into the Instrument 2 jack on the right
side panel.
9. MIc/LIne/InSt 2 GaIn KnOB
Adjusts the input gain level for Mic/Line 2 or Instrument 2.
10. MIc/LIne GaIn KnOB
Adjusts the input gain level for the indicated Mic/Line input.
11. StereO ButtOn anD StereO LeD
This button toggles between Stereo mode and Mono mode for the Mic/Line
inputs on either side of it. The LED lights when Stereo mode is on.
In Stereo mode (Stereo LED is on), the left input signal (Mic/Line 3, for
example) is sent to the Left Main Out, while the right input signal (Mic/
Line 4, for example) is sent to the Right Main Out.
In Mono mode (Stereo LED is off ), each pair of input signals is mixed
together and sent to the Left and Right Main Outs as a mono signal.
12. 48v LeD
Lights when phantom power is active for the inputs on either side of the
LED. Phantom power can be turned on for each combi-jack input pair via
the 48V buttons on the back panel. Dynamic microphones do not require
phantom power to operate, but are not harmed by it. Most condenser micro-
phones do require phantom power to operate. If you are unsure about the
phantom power requirements for your microphone, consult your micro-
phone's documentation or contact the manufacturer.
13. OutPut LeveL KnOB
Controls the Left and Right Main output level.
4