Lexicon 12T User Manual page 45

Clicking the Link button between fader pairs links them as a stereo pair for convenient identical
gain setting. The left fader's value is always favored when Link is used to make the faders operate
at the same level. Control clicking on the Link button will link the fader heads while maintaining
their relative levels. Clicking with the mouse on the fader head while holding down the ctrl key on
the computer keyboard will set the selected fader or stereo grouped fader to 0dB. Gain levels can
also be entered numerically by double-clicking on a numeric field, then entering a value.
Input/Output controls allow you to select S/PDIF or ADAT as the digital format for the optical
input and output connections, and to select between XLR or RCA connectors for the analog
inputs. Conversion between optical and coaxial (RCA) S/PDIF is possible by selecting S/PDIF
O P T O and S/PDIF RCA for input or output and vice versa. When Optical S/PDIF output is
chosen, the RCA output remains active, creating a digital Y-cord or signal splitter. (NOTE: this is
not true of the inputs —both S/PDIF inputs cannot be used at the same time.) You can however
use ADAT OPTICAL and S/PDIF RCA simultaneously.
De-Emphasis Select enables de-emphasis to be applied to the analog output. This function
applies only to the analog converter, and does not affect signals from the S/PDIF or ADAT
interface.
37