Summary Check; Mode Based Summary Check; Operator Based Summary Check - Yaesu DMU-2000 Operating Manual

You may do a band-by band, mode-by mode, or "all log" summary of your log data.
M - S
1. Referring to Figure
[ F5 ( SUMMARY )] key to bring up the "SUMMARY
MODE" page, and you may then press the [ F2 ( MODE-
SEL )] key and select the desired mode, using the
keyboard's arrow ([ ] or [ ]) keys.
2. When you press the [ F6 ( RUN )] key, the summary list
for the selected mode will be displayed.
3. Use the [ F4 ( )] and [ F5 ( )] keys to scroll through
the summary list.
O - S
1. Referring to Figure
[ F5 ( SUMMARY )] key to brings up the "SUMMARY
MODE" page, then press the [ F3 ( OP-SEL )] key and
then use the keyboard's arrow ([ ] or [ ]) keys to
select "ALL-OP" or "CURRENT OP" as desired.
ALL-OP: All log data from all operators reg-
istered on the data stored on the CF
card will be displayed.
CURRENT OP: Only the log data from the current
operator will be displayed.
2. Press the [ F6 ( RUN )] key to display the summary list
for the selected operator, or all operators.
3. Use the [ F4 ( )] and [ F5 ( )] keys to scroll through
the summary list.
Note: The Summary Check function requires that "NOR-
MAL" be selected as the "Log Type" before you start,
and only logs containing the PREFIX may be used for
this function.
Files saved in either ".CSV" or ".TXT" formats are ca-
pable of letting you perform the "Summary Check" func-
tion.
DMU-2000 D M
S
C
on page 31, press the
C
on page 31, press the
U
L B
C
"S
F
M " P
Page 37