Output Modes - DigiTech VX400 User Manual

Output Modes

The Vx400 features both 1/4" and XLR outputs on the rear panel. These jacks let you simultaneously
connect the Vx400 to an amplifier/speaker system on stage via the 1/4" outputs and connect directly to
your PA system via the XLR outputs.
The five output modes for the Vx400 are as follows:
Full
- All input sources are routed out 1/4" and XLR outputs.
Instrument = InsfX
Instrument In
Line Left
Line Right
Mic In
XLRdry
- The dry Mic signal is routed out the XLR outputs only. All other sources and Mic with all
Effects are routed out the 1/4" outputs.
Instrument = InsfX
Instrument In
Line Left
Line Right
Mic In
XLRMOD
- The Mic signal with Modulation Effects is routed out the XLR outputs only. All other sources
and Mic with all Effects are routed out the 1/4" outputs.
Instrument = InsfX
Instrument In
Line Left
Line Right
Mic In
Instrument = insrvb
Line = linrvb
Line = Linefx
Mic Mic Pre Noise
+
Comp EQ
Model Voice Gate
Instrument = insrvb
Line = Linefx Line = linrvb
Mic Mic Pre Noise
+
Comp EQ
Model Voice Gate
Instrument = insrvb
Line = linrvb
Line = Linefx
Mic Mic Pre Noise
+
Comp EQ
Model Voice Gate
Instrument = insdry
Line = lindry
+ +
Effects Delay Reverb
+ +
+
Instrument = insdry
Line = lindry
+ +
Effects Delay Reverb
+ +
Instrument = insdry
Line = lindry
+ +
Effects Delay Reverb
+ +
Vx400 Setups
XLR Left Output
XLR Right Output
+
1/4" Left Output
1/4" Right Output
DRUMS
1/4" Left Output
1/4" Right Output
XLR Left Output
XLR Right Output
DRUMS
1/4" Left Output
1/4" Right Output
XLR Left Output
XLR Right Output
DRUMS
19