DigiTech STUDIO QUAD2 User Manual page 36

34
• Press <UTILITY> and scroll to Page 8 of the Utility Menu using the <NEXT PAGE> and <PREV PAGE> keys. The dis-
play reads:
• To initiate the reset, press <4>.
• This is your last chance to change your mind. If you are sure, press <3>. If not, you can abort the procedure
by pressing <4>. If you press <3>, the Information line of the display briefly reads: FACTORY RESET-
TING... after which the unit resets, and returns to Program 1.
In extreme situations, the Studio Quad V2 can be reset using a special power-up procedure. This will also complete-
ly reset the Studio Quad V2, eliminating any custom settings created by the user. The procedure is as follows:
• Press and hold the <1> Parameter button while powering-up to the Studio Quad V2.
• Release the <1> Parameter button after an asterisk appears in the information line on the screen.
• Press the <Program> button, and the Studio Quad V2 will re-initialize itself.
Section 4 - In Levels and Utilities
1
Factory Reset - press[4]
C C C C
888 2
%kHz %kHz
1 2
m Sec m Sec
CHANGED
MIDI
CLIP
LEVEL 1
FACTORY PRG - CHANGED
S-DISC ™
CLIP
USER PRG - CHANGED P ROCESSING
LEVEL 2
CLIP
FX EDIT PAGE UTILITY PAGE
LEVEL 3
1 2 3 4 5 6 7 8 9 10 CLIP
LEVEL 4
Studio Quad V2 User's Manual
C C C C
888 Yes
%kHz %kHz
3 4
m Sec m Sec
CHANGED
IN 1 OUT 1
IN 2 OUT 2
IN 3 OUT 3
IN 4 OUT 4
DIGITAL CLIP DIGITAL CLIP MODIFIERS