Multi Effects - DigiTech STUDIO QUAD2 User Manual

28
MULTI EFFECTS MODULES
The Studio Quad V2, Multi Effect Modules allow the User to combine either Delay and Chorus or Delay and Flange
within one Effect module block. This is ideal for situations where the User needs to add another effect to the Effect
Configuration, but is running low on signal processing resources. Within the module, there is a unqiue parameter
that allows you route the signal several different ways between the two effects.
PARAM.
Fx: Level
Dry: Level
Balance
Route
Speed
Depth
FdBck
(Flanger)
WvFrm
C/F:Delay
Delay TIme
Feedback
TapIt
Level
C/F/D
Pan
C/F/D
Section 3 - Effects and Parameters
DESCRIPTION
Controls the signal input level fed to the Module. Varies from OFF to 100%.
Controls the level of the dry (uneffected) signal. Ranges from OFF to 100%
Controls the left/right posistioning of the dry signal in the strereo sounfield. Varies from -99 (all left) to
99 (all right).
Selects the route signal path within the Chorus/Delay, and Flange/Delay Multi effects modules.
The 3 settings are: 1) Chorus/Flange into Delay with feedback into the Delay 2) Chorus/Flange into Delay
with feedback into Chorus/Flange 3) Delay into Chorus/Flange with feedback thru the Chorus/Flange.
Controls the Low Frequency Oscillator (LFO) Speed of the Chorus or Flanger. Range of this control
is 0.06 to 16 Hz.
Adjusts the intensity of the Chorus or Flanger effect. Varies from 0 to 30 milliseconds.
Controls how much of the flanged signal is fed back to the input of the module. The FdBack parameter
is what gives flangers their distinctive voice Flangers are capable of both positive and negative feedback
loops, so experiment to find the sound you like best. Ranges from 0 to 30 milliseconds.
Selects which waveform the LFO follows. Options for this control include: Sine, Triangle, SP1 (Special 1),
and SP2 (Special 2).
Controls the delay time of the Chorus or Flanger voice. Ranges from 0 to 40 milliseconds.
Sets the delay time for the delay tap. Delay time ranges from 0 to 300 milliseconds.
Controls the fade time of the delay repeats. Higher settings take longer to fade out , while a setting of
zero will limit the delay to one repeat. Varies from Off to 99%.
Allows you to change the Delay time in real-time by tapping the TAPIT button at the tempo you want.
Delay voice percentages do not change when using this control.
Controls the overall output level of each effect block. Ranges from Off to 100%.
Controls the stereo soundfield placement of each effect block. Ranges from -99 to 99.
Studio Quad V2 User's Manual
Multi Effects Modules