General Format - DigiTech SDISC SYSEX1.25 Manual

General SysEx Format
General SysEx Format
The general format for the System Exclusive information is as follows (note: all SysEx values are
displayed in Hex format along with this symbol
Hex Value
F0
(h)
}
00
(h)
00
(h)
10
(h)
0n
(h)
nn
pp
dd
}
dd
. .
. .
. .
dd
dd
F7
(h)
4
4
Definition
System Exclusive 'Begin Message' byte
Manufacturer's ID Number (DOD/DigiTech)
n = channel number minus one
e.g. 00 is channel 1
(h)
01 is channel 2
(h)
etc...
0F is channel 16
(h)
nn = device ID number
pp = Procedure number. The different procedure's names and general formats
are described in the Procedures Section (page 5).
dd = Data as needed by procedures.
System Exclusive 'End Message' byte
for clarification):
(h)
40 identifies the TSR-24 (Extended SysEx)
(h)
41 identifies the GSP-2101 (Extended SysEx)
(h)
42 identifies the TSR-12 (Basic SysEx)
(h)
43 identifies the RP-10 (Basic SysEx)
(h)
44 identifies the Legend II (Basic SysEx)
(h)
45 identifies the Valve FX (Extended SysEx)
(h)
DigiTech S-DISC™ SysEx
DigiTech S-DISC™ SysEx