Request Paramter Value - 17; Receive Parameter Value; Receive Key Scan Code - 54 - DigiTech SDISC SYSEX1.25 Manual

REQUEST PARAMETER VALUE (17h)
NOTE: This procedure is only implemented in the GSP-2101 Version 3.xx software.
SYS_HEAD, 17
mm The effect module's position in the Algorithm
pp The Paramter's position in the effect module.
When a Request Parameter Value procedure is received, the device will respond with a
Receive Parameter Value procedure.
RECEIVE PARAMETER VALUE (18h)
NOTE: This procedure is only implemented in the GSP-2101 Version 3.xx software.
SYS_HEAD, 18
mm The effect module's position in the Algorithm
pp The Paramter's position in the effect module.
vv The Parameter's value
When a Receive Parameter Value procedure is received, the device's valid Parameter
value is updated with vv.
RECEIVE KEY SCAN CODE (54h)
SYS_HEAD, 54
cc Code for the Key Scan
The Receive Key Scan Code procedure is used to emulate a button press on the front
panel of a DigiTech Device. See the Key Scan Code Maps (page 18) for a list of Key
Scan codes.
DigiTech S-DISC™ SysEx
DigiTech S-DISC™ SysEx
, mm 1 , mm 2 , pp 1 , pp 2 , F7
(h)
, mm 1 , mm 2 , pp 1 , pp 2 , vv
(h)
, cc, F7
(h) (h)
(h)
1 , vv 2 , F7
(h)
Procedures
Procedures
13
13