Section 3- Effects And Parameters About The Parameter Matrix; Compression; Cc Pedal - DigiTech RP6 Owner's Manual

12
SECTION 3 - EFFECTS AND PARAMETERS
ABOUT THE PARAMETER MATRIX

Compression

Parameters
On/Off
Threshold

CC Pedal

Parameters
Type
Max Value
Min Value
Section 3 - Programming
The Parameter Matrix displays all the Effects and Parameters you can
find in the RP-6. The Parameters are arranged in rows and columns.
Use the Parameter Select keys to navigate the matrix. The Effects and
their Parameters are as follows:
Displayed Values
OFF-ON
LO-1...78-HI
The RP-6's Compression can be used to increase sustain and to tight-
en up guitars, and is particularly useful on clean sounds. Parameters
of the RP-6 compressor are as follows:
On / Off..........................Turns the Module on or off.
Amount ..........................Controls the amount of compression applied
to the signal. Higher settings yield a tighter,
more focused sound, while lower settings
allow better dynamics. Ranges from 1-Lo to
78-Hi.
Displayed Values
OFF ... CC1 ... CC8
Parameter dependent
Parameter dependent
The RP-6's CC Pedal allows you to control various Parameters of spe-
cific Effects with a Continuous Control Pedal.
Type .............................There are eight Parameters that can be con-
trolled by the CC Pedal. These Parameters are
labeled with parenthesis in the Parameter
Matrix, indicating which CC value controls that
Parameter.
RP-5 Owner's Manual