Whammy - DigiTech RP6 Owner's Manual

RP-6 Owner's Manual
PCH (Pitch Shifting)
Values 1,2,&3 Displayed Values
Speed -24...0...24
Depth -99...0...99
Not Available
This RP-6's Pitch Shifting effect gives you a shifted signal from 0 to 24
semi-tones above or below the pitch of the input signal.
Shift............................Sets the interval between the original note and
the pitch shifted note. Variable from -24 to 24
Detune.......................Determines the amount of detuning applied to
the shifted note. Variable from -99 to 99.
bnd (Pitch Bending/Whammy)
Values 1,2,&3
Type
Position
Not Available
The RP-6's pitch bending effect allows you to smoothly shift between
two preset pitch intervals using the CC Pedal.
Type...........................Selects the function of the Whammy™ Module.
There are 16 functions available in regular
Whammy Modules. They are as follows:
1= Shallow Detune
2=Deep Detune
3=1 Octave Up
4=Up 2 Octaves
5=Down 2nd
6=Down 1 Octave
7=Down 2 Octaves
8=Down 6 Octaves
Position.........................The POSITION Parameter reflects the current
setting of the Whammy™ effect. This
Parameter should be linked to the RP-6's CC
pedal. As Position is modified, the pitch of the
original note will change in intervals according
to the setting of the WHAMMY TYPE. Ranges
from 0 to 100.
21
Displayed Values
1 ... 16
0 ... 100
9=Major 2nd Up to Major 3rd Up
10=Minor 3rd Up to Major 3rd Up
11=Major 3rd Up to 4th Up
12=4th Up to 5th Up
13=5th Up to 6th Up
14=5th Up to Major 7th Up
15=4th Down to Minor 3rd Down
16=5th Down to 4th Down
Section 3 - Programming