Section Five - Appendix; Specifications - DigiTech RP500 Owner's Manual

Section Five - Appendix

Specifications

General Specifications
A/D/A Converter:
Sampling Frequency:
DSP Section:
Simultaneous
Preset Memory:
Dimensions:
Unit Weight:
Analog Input Connections:
Guitar Input:
Input Impedance:
CD/MP3 Input:
Analog Output Connections:
/4˝ Outputs
Left/Right Outputs:
Left/Right Output Impedance:
Maximum Output:
XLR Outputs
Left/Right Outputs:
Left/Right Output Impedance:
Maximum Output:
Headphones:
Digital Connections:
Universal Serial Bus (USB):
RP500 USB Recording Specifications:
Sample Rate:
Bit depth:
Power Requirements:
US and Canada:
Japan:
Europe:
UK:
Minimum Windows
Vista Home/Premium, XP Home/Professional (SP 2 installed, .NET Framework 2.0* installed)
800 MHz processor speed (.2 GHz recommended)
52MB RAM (GB recommended)
* .NET 2.0 will be installed during installation of X-Edit software if required on XP systems
Minimum Mac Computer System Requirements:
OS 0.4.x, 0.5
PowerPC or Intel
®
recommended)
52MB RAM (GB recommended)
28
24-bit high performance audio
44. kHz
AudioDNA2™ DSP Processor
Effects: 0
00 User Presets (-00) / 00 Factory Presets (F-F00)
9.5˝ Length x 8.625˝ Width x 2.75˝ Height
6.6 lbs.
/4˝ Unbalanced (TS)
500k Ohms
/8˝ Stereo (TRS)
/4˝ Impedance Unbalanced
500 Ohms per side
+0 dBu
Balanced
 kohm per side
+6 dBu
/8˝ Stereo (TRS) – 3.6mW per channel @ 50 Ohms
Type B, supports USB. Full Speed (2 Mbps Bandwidth USB 2.0 compatible)
44. kHz
supports 6-bit or 24-bit (depends on setup in Recording Software)
20 VAC, 60 Hz Adapter: PS093B-20
00 VAC, 50/60 Hz Adapter: PS093B -00
230 VAC, 50 Hz Adapter: PS093B -230
240 VAC, 50 Hz Adapter: PS093B -240
PC Computer System Requirements:
®
G4, G5 processor 800 MHz (.2 GHz