DigiTech RP355 Owner's Manual page 10

6. Drums
The Drums button is used to turn on and off the RP355's built-in drum machine. When the
Drums button is turned on, the Drums LED lights and the selected drum pattern plays continu-
ously. Select the Drums row using the Edit buttons and use Knobs 1-4 to change the style,
pattern, tempo, and level of the drum machine. See page 26 for more information about the
drum machine and a list of patterns.
Note: The drum machine cannot be used while the Phrase Looper is active.
7. Store
The Store button is used to save your custom edits to the user presets. See page 12 for more
information about storing presets.
8. Expression Pedal
The Expression Pedal provides real-time control of the RP355's Volume, Wah, or any assigned
effect parameter. Almost every parameter is available for Expression Pedal control. The
Expression Pedal is equipped with a V-switch that turns the Wah feature on or off when you
apply extra pressure to the toe. See page 13 for more information about Wah models; see page
28 to learn about adjusting V-switch sensitivity and calibrating the Expression Pedal; refer to
page 32 for a list of parameters you can link to the Expression Pedal.
9. Amp A/B Footswitch
This Footswitch switches between two amp channels for the selected preset. The Display will
read AmP A when channel A is selected, and AMP B when channel B is selected. Press and
hold the Amp A/B and the Up Footswitches simultaneously to access Learn-A-Lick
mode.
TM
(See page 27 for more information on Learn-A-Lick . ) Pressing and holding the Amp A/B foot-
TM
switch enables and disables the Phrase Looper; see page 26 for more information about using
the Phrase Looper.
Note: You can apply different EQ models, EQ settings, Amp models and/or Amp settings to
each amp channel (Amp A and Amp B). When the EQ or Amp row is selected, press the Amp
A/B Footswitch to select a channel. The display will show which channel is selected (Amp A
or Amp B).
6