Selectable Output Level; Harmony Tuning Reference - DigiTech QUAD4 User Manual

Quad 4 User's Manual
SELECTABLE OUTPUT LEVEL MODE
The Studio Quad 4 offers you the ability to set your output level (-10 or +4dB). This option can be obtained within
the utility menu and the procedure is as follows:
1. From Program mode, press the <Utility> button and the use the <Next Page> or <Prev Page> buttons
to move to page 6 of the Utility menu and the display will appear as follows:
2. Press the <4> button to select the output level parameter and then use the <Data> to select either a +4
dBv or -10 dBu output. Once the desired output level has been selected, you can exit the Utility menu by
pressing the <Program> button.

HARMONY TUNING REFERENCE

When using Harmony intelligent pitch shifting, the Reference note pitch is set at A=440. If you wish to change the
reference note, you can access this function in the Utility menu. Reference can be set from A=427 to A= 453. The
procedure is as follows:
1. Press the <Utility> button and scroll to page 7 of the Utility page using the <Prev Page> or <Next
Page> buttons. The display reads:
2. Using the <Data> wheel, you can modify the Reference note anywhere from A=427 to A=453.
3. To exit Harmony Tuning Reference, press the <Program> button.
11
Prog Autoload
C C C C
888 On
%kHz %kHz
1 2
m Sec m Sec
CHANGED
MIDI CLIP
LEVEL 1
FACTORY PRG - CHANGED
S-DISC
™ CLIP
USER PRG - CHANGED P
ROCESSING
LEVEL 2
CLIP
FX EDIT PAGE UTILITY PAGE
LEVEL 3
1 2 3 4 5 6 7 8 9 10 CLIP
LEVEL 4
11
Harm Tuning Ref:
C C C C
888
%kHz %kHz
1
m Sec m Sec
CHANGED
MIDI
CLIP
LEVEL 1
FACTORY PRG - CHANGED
S-DISC ™
CLIP
USER PRG - CHANGED P
ROCESSING LEVEL 2
CLIP
FX EDIT PAGE UTILITY PAGE
LEVEL 3
1 2 3 4 5 6 7 8 9 10 CLIP
LEVEL 4
Out Level
C C C C
888 -10
%kHz
3 4
m Sec Sec
CHANGED
IN 1 OUT 1
IN 2 OUT 2
IN 3 OUT 3
IN 4 OUT 4
DIGITAL CLIP MODIFIERS
A=440
C C C C
888
% % kHz %kHz
3
m Sec m Sec
CHANGED CHANGED
IN 1 OUT 1
IN 2 OUT 2
IN 3 OUT 3
IN 4 OUT 4
DIGITAL CLIP MODIFIERS
Section 4 - In Levels and Utilities
33