Screen Calibration; Special Character Keypad - Motorola WT4000 - Wearable Terminal - Win CE 5.0 Professional 520 MHz User Manual

2 - 14 WT4070/90 Wearable Terminal User Guide
Repeat step 3 to move to the desired item.
4.
Press SPACE to highlight the item.
5.
Repeat steps 3 through 5 until all items are selected.
6.
Perform the desired function.
7.

Screen Calibration

To calibrate the touch screen so the cursor on the touch screen aligns with screen taps:
Press Start > Settings > Control Panel > Stylus icon > Calibration tab > Recalibrate button.
1.
Carefully press and briefly hold on the center of the
2.
target moves and stops at different locations on the screen. This enters the new calibration settings.
Calibration Screen
Calibration Screen
Figure 2-11
Once all of the new calibration settings are input, tap the screen or press the
3.
calibration settings. Press

Special Character Keypad

NOTE The Special Character Keypad is only available on non-touch screen configurations.
The wearable terminal contains an on-screen Special Character keypad that allows users to enter alphanumeric
and special characters. The keypad looks and functions like a standard keyboard.
To display the Special Character keypad, press the
Calibration
Confirm Calibration
Screen
to discard the new calibration settings.
ESC
key on the keyboard.
screen target. Repeat the procedure as the
button to save the new
ENTER