Garmin iQue 3600 - Palm OS 5.0 150 MHz Application Manual page 34

iQue 3600
GPS Applications
Using Waypoints
Waypoint Details Page with Route Shown
24
To save a point on the map as a waypoint:
1. With the Map displayed, use the stylus to tap a desired location on
the map which causes the map pointer to display. If the point on
the map where you tapped has descriptive information in the map
Waypoint
database, it displays for six seconds.
Marked on the
2. Once the map pointer is at the desired location, tap the Waypoint
Map Page
icon at the bottom of the map to display the "New Waypoint"
window.
Observe that the "New Waypoint" window has named the location
as an address, intersection, or named map item if supported by
data in the map database. If not supported, it names the location
as Waypoint 1, 2,3, etc.
3. You can use the Graffi ti
New
4. If the point on the map is an address, checking the Include
Waypoint
Address Data option will copy the address information to the
Window
new waypoint.
5. To save the waypoint to the Address Book, tap OK.
To view a waypoint on the map:
1. From the Address Book application use one the following
procedures:
• Tap either the Flag icon or the Location button from the
• Tap the Flag icon at the right side of the waypoint entry on the
2. From QueFind, tap Waypoints, highlight a waypoint in the list,
and tap the Details button.
® 2 input area to rename the waypoint.
"Address View" form.
list view.